CNC Oxy-fuel Profile Cutting Machine

Model: FALCON FXA 3500, Make: ESAB INDIA LTD.

Specification:

X-axis working length: 12,000 mm.,Y-axis working length : 2,700 mm.

Hydraulic 20 mm pre-punching Plate Bending machine

Specification:

Capacity – up to 20 mm thick plate working length – 2600 mm

Heavy Duty Column & Boom with Swivel 355 for welding

Make: ESAB INDIA LTD

Specification:

Effective working range: 3 m (V) x 3 m (H), Travelling base.,Boom height: 3750mm (max.) using stationary foot plate 610mm (min)
Boom height: 4070 mm (max.) using movable carriage 930mm (min),Lifting speed – 0.7 m/min

EOT Crane

5 T capacity Single Girder EOT Crane, Make - Armsel MHE Ltd. & Hoist supplied by SWF Krantechnik GmbH Germany

Specification

Span - 16.65 Metres,Lifting height - 6.4 metres

300 T Hydraulic Press

Specification
Capacity : 300 T
Dimension : (H)x2700 (L) x 600 (W) Cylinder Dimension : 350 mm (OD), 250 mm (Bore) 650 mm (Long)
Hydraulic power pack Pressure : 250 bar
No. of Cylinder : 3 nos

Self Centering Welding Rotator

Three Numbers, Model : CUCR 10  Make: Cu-Built EngineersPvt.Ltd,Pune

Specification : Capacity – 10T

SHOT BLASTING MACHINE

Model: HL-606030 Make: Mec Shot Blasting Equipment Pvt. Ltd., Jodhpur

Specification

Blast Room Enclosure with size 6000 (L) x 6000 (W) x 3000 (H),Portable Abrasive Blaster - Model : P-7:501R, capacity – 500 Kg,Cleaning rate – 11 to 15sqm/hr., Abrasive Recovery Unit – Model : AE,Cyclone Dust Collector (2 sets) - Model : CL-5000 with fabric  bags at outlet. (Blower capacity 5000 cfm),WITH AIR COMPRESSOR (7.5 bar)

Radial Drills

Model – BVR -3

Specification

Drilling in Steel – 32 mm ,Drilling in Cast Iron – 35 mm,Rough boring in Steel – 50 mm, Rough boring in cast iron – 60 mm,Spindle Travel (Drilling Depth) – 225 mm Number of Spindle Speed – 12,Drilling Radius max/min -930/340 mm,Distance from Column to Spindle Centre max/min - 820/230 mm,Distance from Spindle to Base max.min - 990/245 mm,Working Surface - 1000x780 mm

 300 T HYDRAULIC PRESS

SUB MERGE ARC WELDING MACHINE

Quantity  - 1 Set.    Model: CPRA - 1200

Make:    ESAB INDIA LTD, Kolkata.

Specification:

Power source – 415 V, 3-Ph, 50 Hz,Input current – 108 Amps (max),KVA – 77 (Max),Wire feeder, Torch, Regulator, Pre-heater, etc.

PLATE BENDING MACHINE

“HIMALAYA” Three Roll Pinch cum Pyramid type  Fully Electromechanical Plate Bending Machine complete with cone bending facility, MODEL – PHE/25/0

Specification:

Top Roll Diameter (Approx.)  360 mm,Bottom Roll Diameter -(Approx.) 325 mm,Maximum width of plate : 2500 mm,Total Connected Load H.P. : 52.5

Universal Band SAW